Language
banner

Products

Home > Products > Others Chemical Products > Content
W1b / Plastics Additives of Compatiblizer for Reinforcing and Toughening Nylon, PP, PE and Others

W1b / Plastics Additives of Compatiblizer for Reinforcing and Toughening Nylon, PP, PE and Others

Overview Characteristic: This product is ethylene elastomer with functionalized MAH which is especially suitable for sup
SHARE
Send inquiry

Description

Basic Info
Model NO. W1B
Specification 20 KGs per bag
Origin China
HS Code 3901909000
Production Capacity 20 Million Metric Tones Per Year
Product Description
Characteristic: This product is ethylene elastomer with functionalized MAH which is especially suitable for super-tough or cold-resistant nylon.
Product ModelW1B
AppearanceWhite or light yellow even granules
Melt Index(190°C,2.16Kg):g/10min0.8-2.0
Grafting RatioHigh
Density(g/cm3)0.86
Application
1.Be used for PA6 or PA66 compatibilizing or toughening. Increase the impact resistance and processability of nylon, decrease the water absorption, greatly improve the cold-resistance.
2.Be used for the compatibilizer of nylon and polypropylene/polyethylene alloy.
3.Be used for the macromolecular modifier(coupling agent) of mineral filled or glass-fiber filled nylon.
Cold-resistance test data:
Izod Notched Impact Strength J/m
Ingredient23°C-40°C-50°C
PA6+15%W1B760278260
PA6+20%W1B900880538
PA6+25%W1B1020970662

As can be seen from the above figure, the product has a good low temperature toughening effect on nylon between -40 and -50, and the notch impact rejection rate at low temperature is very high.

Recommended dosage:
5-25%, which can be increased or decreased in moderation according to the toughness requirements, taking into account the cost. PA6, PA66 reinforced and toughened (3-10%), the phase of nylon, polypropylene, polyethylene blended gold Container (3-10%).

Packaging and Storage:
20KG kraft paper bag with internal plastic bag, This product shall be treated as non-hazardous article and be stored or transported under dry conditions, avoid sunlight and rain.
Detailed Photos

W1b / Plastics Additives of Compatiblizer for Reinforcing and Toughening Nylon, PP, PE and Others


Other POE-g-MAH series List:
Brand number
Melt index
190ºC 2.16kg
g/min		Grafting ratio
Density
g/cm²		Characteristic
W1A0.3-1.0High0.87PA reinforced filling, ultra-low temperature toughening.
W1A-20.3-1.0High0.87PA reinforced filling, ultra-low temperature toughening.
W1A-40.1-1.0High0.87PA reinforced filling, ultra-low temperature toughening.
W1A-6>0.1High0.89PA reinforced filling, low temperature toughening.
W1A-F5-14High0.87PA reinforced filling, TPE encapsulated
W1B0.3-2.0High0.87PA reinforced filling, ultra-low temperature toughening.
W10.2-1.0High0.88PA reinforced filling, low temperature toughening.
W1C0.3-1.5Medium0.88PA reinforced filling, low temperature toughening.
W1D0.6-2.0High0.88PA reinforced filling, low temperature toughening.
W1F10-24High0.87PA reinforced filling, high dispersion.
Note: The above data are typical values tested and should not be construed as specifications
Low < 0.4 wt %, Medium 0.4 - 0.8 wt %, High > 0.8 wt %Application Display

W1b / Plastics Additives of Compatiblizer for Reinforcing and Toughening Nylon, PP, PE and Others

Production Process

W1b / Plastics Additives of Compatiblizer for Reinforcing and Toughening Nylon, PP, PE and Others

Company ProfileCOACE Chemical is located in Xiamen Special Economic Zone, China. It is a national high-tech enterprise integrating R&D, production and sales of polymer materials, specializing in R&D, production, sales and service of plastic compatibilizers and toughening agents.
For more than ten years, the company has been adhering to the business philosophy of "stable quality, refinement and globalization", serving the market, the factory owns 50,000 square-meter area and nearly 100 employees, including 20 technical R&D personnel, and is equipped with eight modern extruding-pellets systems production lines, which ensure the annual capacity of ten thousand metric tons. The products cover compatibilizers, coupling agents, impact modifiers, and other functional additives. and obtained ISO9001 quality management certification, with an annual production capacity of 20,000 tons.

W1b / Plastics Additives of Compatiblizer for Reinforcing and Toughening Nylon, PP, PE and Others

W1b / Plastics Additives of Compatiblizer for Reinforcing and Toughening Nylon, PP, PE and Others


Our certifications

Exhibitions
Our advantages
  1. Research & Development strength
  2. Quality assurance
  3. Product customized
  4. Lower costs and more convenient cross-boarder trader
  5. Delivery on time and global service

Prev: Antique Copper/Silver/Gold/Brass/Bronze Hammer Texture Pure Polyester Powder Coating

Next: Excellent Quality Factory Price, Titanium Dioxide Others

Our Contact

Categories
Related products